
Walk-up unit type · Two modules
One bedroom — The entry unit in the range and the densest home on the grid. Two modules give an open-plan living and kitchen space, a separate bedroom, a full bathroom and a private balcony — the specification that serves single occupiers, key workers and first-time buyers.
The entry unit in the range and the densest home on the grid. Two modules give an open-plan living and kitchen space, a separate bedroom, a full bathroom and a private balcony — the specification that serves single occupiers, key workers and first-time buyers.
- Module bill
- 2modules
- Internal area
- ±35m²
- Bedroom
- 1
- Bathroom
- 1
Precast Africa development model · Multi-storey residential walk-up
Volumetric precast · areas indicative · visualisations
01At a glance
The smallest home on the grid. A complete one.
Specify it where land cost or affordability sets the unit size — student and key-worker housing, rental stock, and subsidy-linked programmes where a self-contained home has to be delivered at the lowest viable footprint.
Every home in the range is entered from a shared landing — four homes to a landing, in blocks of three to ten storeys, served by a stair and lift core. Structure, services and finishes are installed in the factory and inspected before delivery.
- Per home
- 2modules
- Internal
- ±35m²
- Plan width
- 6.5m
- Bedroom
- 1
- Bathroom
- 1
- Balcony
- 1

Indicative floor plan
Two modules

02The plan
Two modules, one open volume.
Entered from the landing, with the living space and balcony to the outer elevation.
- Living / kitchen
- Open plan
- Bedroom
- Off the hall
- Bathroom
- Wet-core module
- Balcony
- Off the living space
- Entry
- From the landing
Indicative — not dimensionally binding
Dimensions are indicative and confirmed at design freeze. Plans are handed left or right within a block.
03In the block
One unit type in a repeatable block.
Blocks repeat around landscaped courtyards and connect into the scheme's wider open space, parking and services. The unit does not change; the precinct around it is designed for the site.
- 4homes per landing
- One central stair and lift core per block, from three storeys to ten.
- Mixfreely
- All three unit types share one grid, so the mix is a planning decision, not an engineering one.
- Ownfront door
- Every home is entered from its own landing — no internal corridors to build or maintain.
- Lowoperating cost
- Durable finishes and simple services, specified for long-life rental or sale stock.


Two modules · Living · kitchen
One volume does the living.
Kitchen, dining and lounge share a single open span, with the balcony doors on the long elevation so the room reads wider than its footprint.

Two modules · Bedroom
A full bedroom, not an alcove.
The bedroom and bathroom sit off the hall, sized for a full-size bed with built-in storage and a window to the courtyard elevation.

04Production standard
One finish specification, across the range.
The finish specification is identical across the range. What is signed off in the factory is what is handed over on site.
- 01Complete on deliveryKitchen, bathroom, joinery and flooring are installed and finished before the module leaves the factory.
- 02Inspected and recordedEvery module carries its own production, inspection and installation record, so compliance survives the full rollout.
- 03Built to lastVolumetric precast concrete with low-maintenance finishes — specified for long-life stock and low operating cost.
- 04Programme-certainModules are cast in parallel with site preparation, not sequenced after it, so the delivery date is set before production starts.
Next step
Specify this unit type.
Module bills, typical plans and the finish specification are issued on request. Send us your site and target unit mix and we will return a block layout and a delivery programme.
Other unit types
One bedroom±35 m² · 2 modulesYou are here
- Two bedroom±52 m² · 3 modules
- Three bedroom±70 m² · 4 modules
© 2026 Precast Africa · Computer-generated visualisations, illustrative only. Plans are indicative and not dimensionally binding. Module bills, internal areas, finishes and programme are confirmed at design freeze for each scheme and are subject to statutory approvals. E&OE.
